Hardware

Use this SCS Adapter with any handlebars that include a pre-cut slit to allow use with an SCS clamp. To install, fit into the bottom of a set of handlebars, at the slit. Comes in Standard & Oversized variants. *Adapter will be VERY difficult to remove...

eep dropouts bend-free & squared with these plastic deck plugs. Fits small-sized Root Industries AIR Decks.

Ethic Compression Key 6mm, to be used with the Ethic Compression Screw 6mm and ICS Forks.

The Shim is a step down shim for riding different size handlebars. Shims allow you to use 1-¼" handlebars. SPECIFICATIONS Weight (38.1mm Height): 0.6oz Weight (45.9mm Height): 0.7oz Weight (47.6mm Height): 0.7oz Material: 6061-T6...

The Bearing Spacer is your Tilt quality bearing spacer. These spacers are precision ground to tight tolerance. Your wheels are more likely to be dialed with Tilt's bearing spacers. SPECIFICATIONS Weight (10mm Length): 0.3oz per pair Weight (16mm...

The Clamp & Compression Bolt is a custom bolt that is for use with most Tilt clamps and compression. Grease is recommended to maximize the clamping power wherever you use them. SPECIFICATIONS Weight: 0.4oz each Material: Heat-treated alloy steel Thread:...

The Compression Bolt & Washer comes with 1 Compression Washer and 1 Clamp/Compression Bolt. These are precision machined options made by Tilt for riders who want a dialed setup. You'll find these included with all Tilt SCS, and these are a good...

The Deck Axle is a custom piece of hardware by Tilt. The custom washer under the head of the bolt allows more torque to keep your setup dialed, and the custom length makes sure your deck and wheel are riding on the sold part of the axle, not the threaded...

The Flush 5 axle system is the next step in front end scooter technology. Designed specifically for flush fit, this axle does not protrude from the fork protecting you from snags and grabs while grinding. Precisely manufactured 5mm drives prolong life...

The Wheel Spacers are utilized to ride different wheel widths in compatible forks and decks. SPECIFICATIONS Weight (3mm Length): 0.1oz per pair Material: Steel COMPATIBILITY Deck (3mm Length): Theory, Theory 002, Ten Year, Theory 3, Stage I,...

This Steel Washer is for use with Full Knucle SCS ONLY. Will not work with Baby SCS. Size: 1/8 Washer 1.312 OD, .250 IND.

This Steel Washer is for use with Baby SCS ONLY. Will not work with Full Knuclke SCS. 1/8 Washer 1.215 OD- .250 IN. TILT COMPATIBILITY Compression: SCS and SCS LT Fork (M6 Compression Thread): All Tilt forks pre 2016