Hardware

Compression Screw for the Ethic Merrow V2 and Nemesis Fork SCS HIC.

Ethic Bar adapter to fill the slit of a bar and install it in scs. (instead of cut the slit) 2 diameters available, 31.8mm and 34.9mm. Basically 34.9mm will be for oversized bars, and 31.8 for others.

Compression Screw for all the Ethic ICS Forks and Bars. ICS 10, 6mm. Can be used with Ethic Starnut ICS 10 And also the 6mm Compression Key.

The Ethic Shim is made for HIC Compression Systems Forks and Oversized Bars. Weight: 0.17 lbs (75g) Compression Type: HIC

3 mm height 3 rings per package

Use this SCS Adapter with any handlebars that include a pre-cut slit to allow use with an SCS clamp. To install, fit into the bottom of a set of handlebars, at the slit. Comes in Standard & Oversized variants. *Adapter will be VERY difficult to remove...

eep dropouts bend-free & squared with these plastic deck plugs. Fits small-sized Root Industries AIR Decks.

Ethic Compression Key 6mm, to be used with the Ethic Compression Screw 6mm and ICS Forks.

The Shim is a step down shim for riding different size handlebars. Shims allow you to use 1-¼" handlebars. SPECIFICATIONS Weight (38.1mm Height): 0.6oz Weight (45.9mm Height): 0.7oz Weight (47.6mm Height): 0.7oz Material: 6061-T6...

The Bearing Spacer is your Tilt quality bearing spacer. These spacers are precision ground to tight tolerance. Your wheels are more likely to be dialed with Tilt's bearing spacers. SPECIFICATIONS Weight (10mm Length): 0.3oz per pair Weight (16mm...

The Clamp & Compression Bolt is a custom bolt that is for use with most Tilt clamps and compression. Grease is recommended to maximize the clamping power wherever you use them. SPECIFICATIONS Weight: 0.4oz each Material: Heat-treated alloy steel...

The Compression Bolt & Washer comes with 1 Compression Washer and 1 Clamp/Compression Bolt. These are precision machined options made by Tilt for riders who want a dialed setup. You'll find these included with all Tilt SCS, and these are a good...